U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock () or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Return to Georgia Ecological Services Field Office

Georgia Field Office's Project Review Process

Updated November 12, 2026

[Back to the Georgia Ecological Services Home Page]

Overview

Section 7 of the Endangered Species Act (ESA) requires Federal agencies to consult with the U.S. Fish and Wildlife Service (Service) to ensure their activities - permitting, funding, implementation, etc. - will not jeopardize the continued existence of threatened or endangered species or adversely modify critical habitat. 

Our biologists can also review projects that will not involve Federal permitting or funding. Section 10 of the ESA applies to non-Federal actions that are likely to take listed species. This process includes development of a Habitat Conservation Plan which will be accompanied by an Incidental Take Permit. The Georgia Ecological Services Field Office will provide information to help you decide if this is the right choice for you. We recommend you coordinate with our office early if you anticipate this to be the most appropriate path for your project.

This guide walks federal agency staff or their designees, or other project representatives through the technical assistance and consultation process, helping you create the appropriate documentation – a biological assessment or evaluation – to submit to the Service in fulfillment of ESA obligations. 

Before you begin

Roles and responsibilities during the consultation process - The Endangered Species Act defines consultations process obligations for federal agencies (including their designees for this process) and the Service:

  • The federal action agency or their designee – Describe the project; identify the action area; identify the species and critical habitat present within the action area; describe how the project, as planned, may impact those species or habitats; reach an effect determination for the project, i.e. an official conclusion on the impact the project will have on listed species. 
  • The U.S. Fish and Wildlife Service – Review material submitted by the action agency to ensure completeness; evaluate any effect determination and provide concurrence as appropriate; determine whether the project will jeopardize a species or adversely modify critical habitat; offer reasonable and prudent measures to decrease negative impacts if the project will jeopardize a species or adversely modify critical habitat; authorize an appropriate amount of incidental take (harassment, harm, wounding, killing, etc.) of a listed species based on the project description and species present. 

Timelines - Projects are reviewed on a first-come, first-served basis, so please plan accordingly. Our timelines: 

  • We respond to project review requests within 30 days. 
  • For projects that may affect but aren’t likely to adversely affect a listed species, we complete review (i.e., informal consultation) within 60 days of receiving a complete biological assessment or evaluation. 
  • For projects that are likely to adversely affect a listed species, we complete review (i.e., formal consultation) within 135 days of receiving a complete biological assessment or evaluation.

Important notes - Fundamental to quickly and successfully completing project review under Section 7 of the ESA is explaining how you reached your conclusions and including in your biological assessment or biological evaluation a thorough description of the information you used and the reasoning that led to your conclusions. 

Getting Started

All reviews begin at the Information, Planning, and Conservation (IPaC) Tool, where landowners, consultants, agencies, and anyone that requires U.S. Fish and Wildlife Service review of a project may request an official species list. For projects related to the Georgia Department of Transportation (GDOT), please refer to the Districts and Agency Contacts map available on the GDOT Ecology webpage to determine the appropriate USFWS contact. Please send all other requests for project reviews to GAES_Assistance@FWS.gov

Aerial image of Kings Bay with forested wetland visible.

Information, Planning, and Conservation (IPaC) Tool

Request an Official Species List for your project's action area.

Tall, green grasses with longleaf pines and blue sky in the background.

Georgia Conservation Planning Toolbox

Our Conservation Planning Toolbox provides free resources for project managers and anyone interested in practices that help protect imperiled species in Georgia.

Man kneeling with students, one of whom is holding a piece of paper with illustrations of invertebrates

Georgia Statewide Determination Key

Step 1: Describe the action

To determine how your project may interact with listed or proposed species and their habitats a detailed account of all project elements is necessary, including: 

  • Project purpose. 
  • The federal agency involved and their role. 
  • Maps with enough detail to discern project boundaries and action area (see Step 2 for additional information about action area). Such maps should include but are not limited to: vicinity map with address and latitude/longitude in decimal degrees; property boundary or parcel maps; aerial and topographic maps; site plans – plan view, typical cross-sections, and engineering specifications. SHP or KML files are appreciated. 
  • Site preparation, including earth moving or tree clearing with acreages and timing. 
  • Construction steps and methods, including equipment, materials, description of percussive activities, use of lighting (type, location, etc.); project timing (time of year, time of day or night, etc.). 
  • Any project-associated remediation or restoration work. 
  • Project and permitting timelines. 
  • Long-term operation and maintenance activities (mowing, herbicide use, etc.). 
  • Any other available information related to the nature and scope of the proposed action relevant to its effects on listed species or designated critical habitat.

 What you should have at the end of this step: Detailed project description with enough information to: 

  • Accurately determine the project’s effects on any listed species or critical habitat present. 
  • Enable the Service to identify the extent of impacts to listed species.  
  • Enable the Service to assess your effects determination and whether the project jeopardizes a species or adversely modifies critical habitat. 

Include this description as the first part of your biological assessment or evaluation.

Step 2: Define the action area

The next step is to define your project’s action area - all areas affected, directly or indirectly, by the action, not simply the project footprint, nor the limit of the Federal agency's authority. It includes temporary and permanent changes to land, water, and air caused by activities reasonably certain to occur and that would not occur but for the proposed federal action. Note: Defining the action area is based on how the project is proposed, not how it could hypothetically be done.  

What to include:  

  • Project footprint on a topographic map, including all ground-disturbing and tree removal activities, access roads, staging areas, borrow pits, etc.  
  • Areas beyond the project footprint that are altered by the project, including areas where there are: 
  • Changes in water quality, quantity, and/or flow (both surface and groundwater - including precipitation once it hits the ground). 
  • Changes to air quality and/or flow. 
  • Changes to lighting – artificial or natural. 
  • Changes to temperature. 
  • Changes to sound. 
  • Changes to pressure. 

What you should have at the end of this step - The defined geographic extent of the project’s impact on the surrounding environment, i.e., your action area. Include this description in the second section of your biological assessment or evaluation.

Step 3: Consider at-risk and listed species and generate an official species and critical habitat list

Now that you know your action area, identify 1) what threatened or endangered species may be present in your action area, and 2) what critical habitat is in your action area. Note: Critical habitats are formally designated areas with physical or biological features essential to the conservation of listed species. Federal agencies must ensure their actions don’t appreciably diminish the value of critical habitat for listed species. Designated critical habitat has a legal status and isn’t synonymous with “suitable habitat.”

Contact the Georgia Department of Natural Resources Environmental Review Team. Our state agency maintains a database and has differing expertise and/or regulatory responsibility. If the agency provides documentation that a federally listed, proposed, or candidate species may be present within the project footprint or Action Area, include this response in your project review package.

Generate an official species and critical habitat list. The Service has an online tool, the Information for Planning and Consultation system (IPaC), to help with the consultation process. IPaC provides, among other things, a list of threatened or endangered species and critical habitats to be considered for a given action area (i.e., official species list). It will also provide a list of plants and animals proposed for the threatened and endangered species list. Use IPaC to generate an official species and critical habitat list for your action area: 

  • Go to IPaC (https://ipac.ecosphere.fws.gov/) and login to your account via the “Log In” button. 
  • Once logged in, click “Get Started” and follow the three steps on the left. Click “Continue.” 
  • An unofficial list of species is presented to you. If this list is printed, it will include a “not for consultation” watermark. 
  • Under “What’s next?”, click “Define Project.” The pop-up window will ask for a “Project Name” and “Project Description.” Once you enter information, click “Save”. 
  • Under “What’s next?”, click “Start Review,” then “Continue”, then “Yes, Request Species List”. 
  • Answer the questions provided and click “Submit Official Species List Request” to obtain an official species list without the above-mentioned watermark. Save the PDF version of this list. 
  • If there are no listed species or critical habitat, your obligations under the ESA are complete. 

For a video demonstrating the process for requesting an official species list, follow this link - https://www.youtube.com/watch?v=DIDciJAbsAQ 

What you should have at the end of this step – A list of federally threatened or endangered species whose range overlaps your action area and any designated critical habitat that overlaps your action area. This should be included in your biological assessment or evaluation. All review requests submitted to the Georgia Ecological Services field office must also include the Project Code identified on the official species list generated in IPaC. 

Step 4: Evaluate suitable habitat and listed species

Step 3 gave you a list of species ranges that overlap your action area. However, that doesn’t mean a particular plant or animal’s habitat is present, and without its habitat, the species won’t be present. Using information provided by IPaC, a natural heritage program, or other reliable sources (e.g., Georgia DNR Biodiversity Portal, Five-Year Reviews, USFWS species profiles pages, habitat assessments/surveys), identify suitable habitat for each species in your official species list, then determine if the suitable habitat occurs within the action area. Note your conclusion in a species determination table (see example 1 below) and include the information used to reach this conclusion. This information could include, but is not limited to, habitat assessments/surveys, botanical species lists, plant communities present, stream bed substrate and flow regime descriptions, soil type, etc. Habitat assessments or surveys must be conducted by a qualified professional during appropriate survey times.

  • If you can confirm suitable habitat is absent within the Action Area, document what source(s) of information you consulted and justification for this conclusion. 
  • If you determine that suitable habitat may be present or are uncertain whether habitat may support listed species, a detailed habitat assessment is recommended. 
  • If suitable habitat occurs within the Action Area, species surveys are recommended. Document that suitable habitat is present along with the source(s) of information you consulted and justification for this conclusion. Include any survey reports in your project review package.
  • If suitable habitat occurs within the Action Area but surveys are not conducted, include this information in your project review package. It may be necessary to assume presence for species in these circumstances and consider implementing appropriate avoidance and minimization measures, accordingly

Example 1 – Determination table showing where to note the presence of suitable habitat and the information used to determine suitable habitat presence. 

Species/Resource NamePresence in Action AreaInformation UsedEffect DeterminationConservation Measures Incorporated into Project
Michaux’s sumac

Suitable habitat present

-OR-

Suitable habitat not present

Explain what info was used to determine presence of suitable habitat  

What you should have at the end of this step – Documentation of whether suitable habitat and/or listed species is present in your action area and a record of how you reached that conclusion. Include this in your biological assessment or evaluation. 

Table 1. General guidelines for evaluating whether species on the official species list may be present in an action area. If species-specific survey guidelines are available, follow those guidelines to carry out surveys and to interpret results, as appropriate.

Is the species’ habitat present in the Action Area? Species survey results Conclusion Next step Comments 
No Not warranted Species not present in Action Area Consultation not required Consider potential for the species’ habitat to become established in the Action Area. 
Yes Survey(s) confirm that species are absent in the action area Species not present in Action Area1 Consultation not required 1Plan and implement surveys and interpret results in coordination with USFWS and/or in accordance with USFWS-recommended survey protocols. 
Yes Survey data in the action area are unavailable or inconclusive Assume species may be present in Action Area 

Initiate consultation 

 

Yes Survey(s) confirm that species are present in the action area Species is present 

Initiate consultation 

 

Step 5: Evaluate the preliminary effects to the species and critical habitat

Once you know what the project will entail and what habitat and species are present, you can determine any effects to the species and critical habitats and add them to your table. Are any species likely to be exposed to stressors caused by the proposed action? Will any activities alter the essential physical and biological features of a designated critical habitat? Remember to consider how individuals will be impacted by changes in water quality, quantity, and/or flow; changes to air quality and/or flow; changes to lighting – artificial or natural; changes to temperature; changes to sound; or changes to pressure. Consider impacts to an individual’s body, to their behavior (e.g. flight patterns), or to habitat (e.g. prey base). 

For each species, you’ll determine how the project will likely affect the species. There are three possible determinations: 

  • No effect – If suitable habitat for a species is not present within the action area or impacts to suitable habitat will be completely avoided. This determination is appropriate if the proposed action – or other activities that are caused by the proposed action – would have no consequences to listed species or critical habitat. Concurrence from the Service is not required.
  • May affect, not likely to adversely affect –  
    • If species habitat is present, but the species isn’t, as demonstrated by surveys conducted during approved survey windows by qualified individuals. 
    • If the species is present but all effects are wholly beneficial, insignificant, or discountable. There may be cases where this determination is possible with a commitment to sufficient conservation measures. Beneficial effects have contemporaneous positive effects without any adverse effects to the species or habitat; insignificant effects are undetectable, not measurable, or cannot be evaluated; discountable effects are extremely unlikely to occur.
    • If there is suitable habitat and the species is assumed present (no valid species survey results), and all effects are wholly beneficial, insignificant, or discountable. 
    • These determinations require informal consultation and written concurrence from the Service. 
  • May affect, likely to adversely affect – If the species is present or assumed present and the action or its consequences are likely to negatively impact it, and the impact is not insignificant or discountable. These determinations require formal consultation and written concurrence from the Service. 

Use these tips to avoid common determination flaws. 

Enter your effect determination for each species in the “Recommended Determination” column on your determination table (Example 2), and write up your rationale and evidence for each effect determination. 

Example 2 – Determination table showing where to note the effect determination. 

Species NamePresence in Action AreaInformation SourcesEffect DeterminationConservation Measures Incorporated into Project
Michaux’s sumac

Suitable habitat present; species not present on July 21, 2023

-OR-

Suitable habitat present; species present on July 21, 2023

Explain what information was used to determine presence of suitable habitat and species

No effect

 

-OR-

May affect, not likely to adversely affect

-OR-

May affect, likely to adversely affect

 

Determination Keys

To help this process, the Service has performed up-front analyses for certain project types, agencies, species, and critical habitats. The analyses have been compiled into determination keys (dkeys), a simple online interview process to help you arrive at a recommended determination for some species in your action area. Dkeys available to your project depend on location, lead Federal action agency, project type, etc. To see what dkeys are available to your project, select “Next Step: Determination Keys” or “Evaluate Determination Keys” in IPaC after you generate an official species/critical habitat list. Note: Not all dkeys in the list will apply to your project even though they are available. 

To complete a dkey, while in IPaC: 

  • Click “Evaluate” under the applicable dkey. 
  • Review the information on the dkey landing page. If you determine the dkey applies to your project, click “Check If My Project Qualifies.” 
  • Answer each yes/no question presented by the dkey until the dkey provides a response. 
  • If the response indicates that the dkey does not apply, then the project 1) is out of the scope of the dkey, or 2) “may affect” listed species or critical habitat and closer examination is warranted to discern how the project may affect a listed species. Follow the instructions provided by the response. 
  • If the response indicates “no effect” or “may affect, not likely to adversely affect,” click “Save and Continue.” 
  • Answer any project survey questions and click “Continue.” 
  • Click “Generate.” 
  • Verify the project information and click “Generate.” 
  • Save the PDF generated by IPaC. 
  • Click “Exit Review”. Do not complete “Analyze project” or “Download documentation.” 

For a video demonstrating the process to complete a dkey, follow this link - https://www.youtube.com/watch?v=QkamFZK8EfU 

The appropriate Service office is automatically notified of dkey results. Please read your letter closely. If consultation on all listed species and designated critical habitat is completed via dkeys, i.e., the dkeys return determinations of “no effect” or “may affect, not likely to adversely affect” for all species and critical habitats on your list, the Service has a period to review the dkey results - please note this time, usually 30 days. If you do not hear from the Service by the end of the review period, consultation is complete and you do not need to contact a Service biologist.  

If dkeys do not apply to some or all the species or critical habitat on your official species/critical habitat list, then the project is out of the scope of the dkeys, or it may affect a listed species and/or critical habitat and needs additional review by the Service. You’ll need to submit your project to the field office for further review - continue to Step 5 below. 

What you should have at the end of this step – An effect determination for each species and critical habitat listed on your table and the rationale and evidence you used to reach that conclusion. Include all of this in your biological assessment or evaluation. If you completed a dkey, you’ll have official communication from the Service either: 

  1. confirming a “no effect” determination, 
  2. concurring with a “may affect, not likely to adversely affect” determination, 
  3. indicating a “may affect” determination, in which case additional review is needed to discern whether the project is likely to adversely affect a species, or 
  4. a combination of responses.

If you dkey letter states that additional consultation is needed for your project, please include any dkey responses generated by IPaC in your biological assessment or evaluation.

Step 6: Identify conservation measures and finalize effect determinations

Conservation measures are steps the action agency, or its designated non-federal representative, take to minimize the action’s negative impacts to listed species or critical habitat. These can include, but are not limited to, altering the timing of an action (on a seasonal or daily basis), altering the footprint of the project, or altering or adding project activities and practices to minimize or avoid impacts. For example, trees could be cut or structures demolished when bats will not be roosting in them; the footprint of a section of earth to be turned could be adjusted to exclude a population of a listed plants; or a strict sediment and erosion control plan could be put in place to protect an imperiled mussel. Other common conservation measures include on-site environmental training for contractors or placement of physical barriers between work and sensitive habitats or plants. If a "may affect, likely to adversely affect" determination is made for a species, please include all measures proposed to avoid or minimize potential impacts to each species and critical habitat in the “Conservation Measures Incorporated into Project” column.

Sample and potential conservation measures can be found here.

Incorporating sufficient conservation measures into a project may change effect determinations reached in Step 5, e.g. a project that was “likely to adversely affect” a species may become “not likely to adversely affect” a species when conservation measures are applied. Once your conservation measures are identified, revisit your effect determinations from Step 5 to see if any need to be updated in the table and in the narrative of your biological assessment or evaluation.

If, after identifying conservation measures, a determination of “likely to adversely affect” is recommended for any species, you may be asked by the Service biologist for a more thorough biological assessment than this step-wise process provides, as the Service needs sufficient information to determine 1) if the project will jeopardize a species and 2) how much take to authorize for the project.  

Enter conservation measures in the final column of the determination table (Example 3) for each species. 

Example 3 – Determination table showing where to note conservation measures. 

Species/Resource NamePresence in Action AreaInformation SourcesEffect DeterminationConservation Measures Incorporated into Project
Michaux’s sumac

Suitable habitat present; species not present on July 21, 2023

-OR-

Suitable habitat present; species present on July 21, 2023

Explain what info was used to determine presence of suitable habitat and species

No effect

-OR-

May affect, not likely to adversely affect

-OR-

May affect, likely to adversely affect

If no effect, denote as N/A.

-OR-

List proposed conservation measures that avoid and minimize effects of the action to the listed species or resource.

When the Federal agency, or their designee, determines a project "may affect" a listed species, they must 1) initiate formal consultation or 2) seek written concurrence from the Service that the action is not likely to adversely affect listed species (50 CFR 402.14(a)). 

What you should have at the end of this step – A list of conservation measures to be incorporated into the project and updated effect determinations that factor in the conservation measures. Include all of this in your biological assessment or evaluation. 

Step 7: Consider other federal trust resources 

IPaC will also indicate the potential presence of migratory birds and other bird species of concern within the vicinity of the action area. To prevent and minimize potential impacts to migratory birds, please consult the Service’s Migratory Bird program.

Step 8: Compile your project review package 

Federal agencies and their non-federal designated representatives are not required to contact us for “no effect” determinations. For “may affect, not likely to adversely affect” determinations, please submit your project review package, including detailed project description, effects determination, conservation measures, and all supporting documentation. 

Non-Federal applicants may also request a project review to ensure compliance with the Endangered Species Act.  

After completing Steps 1-7, compile the information listed below:

StepItemsRequired
1Project descriptionY
2Map of project boundary and action areaY
3Official species and critical habitat list (from IPaC)Y
4Habitat assessments (include any completed reports)Y
4Species survey results (include any completed reports)If applicable
5Determination Key letters (from IPaC)If applicable
5-7Completed species determination table, including voluntary conservation measuresY
 Other documentation to support your effects determinationIf applicable

Step 9: Submit your package electronically following the guidelines below

Submitting information to IPaC does not submit information to a biologist at the Georgia Field Office. To request project review, you must submit your review request via these guidelines:

  • Format and size: Please consolidate all documents into the least number of documents and e-mails as possible. We are unable to access documents uploaded to Google Drive or OneDrive. If you are unable to upload all relevant documents to an email, please contact the office at GAES_Assistance@FWS.gov or contact the appropriate transportation liaison (GDOT projects only) to request a secure file share option. 
  • Subject line: In your email subject title, indicate the name of your project and the project county. 
  • Review time: All project review packages submitted to gaes_assistance@fws.gov (except projects involving formal consultation) are typically reviewed by a biologist within 30 days. This timeline is extended if a project review package is incomplete and additional information is required. 
  • Keep records: Maintain a complete copy of the project review package in your files since it will become an integral part of your official record of compliance.

[Back to the Georgia Ecological Services Home Page]

Explore more: